Jump to content

Recommended Posts

Posted

I'd like a way to set up fan behavior within the HexOS dashboard (or curate an app that handles it).  My motherboard bios doesn't allow me any control on drive temps, so my drives are always a little hotter than I'd prefer. 

  • Like 2
Posted

Unfortunately fan controller functionality is not built into truenas scale at this time and there are no fan controller apps on the truenas app catalog for us to curate.

  • Like 2
  • Thanks 1
Posted

I appreciate the response. I imagine if it was easy somebody probably would have already integrated it into TrueNAS. Maybe you can use you relationships with the leadership and make it a feature request ;)

  • Like 1
Posted

Everything may last longer when you keep them in within a certain temp range. I've seen a lot of things over time for hard drives. The issue the better you cool the drives the more you give up. In data centers fans are running full speed most the time. In a house you usually don't want all that noise. We like hot swap bays so it's easy to replace a drive but that means you got drives right next to each out sharing all the head each drive make. I've seen 5 inch drive bay adapters for hard drive that turn a 3.5 inch drive into a 5 inch size drive which is 1.5 inches of heat sync around the drive to give the drive the best way to cool down with air cooling. I've purchased it and ran it in a server for years like this. You can't have this and make it hotswapable. Had to shutdown the server and open it up and unscrew it all to replace drives. I didn't have any fail which is the point of it but when increasing the size you have a lot more work to do. Thanks for posting your request. If there was a tool like this we'd think about adding it.

Thanks

  • Like 1
  • 4 months later...
Posted (edited)

Hey! Thanks for adding fan control!

 

Looks like my mobo isn't supported though. :(

Edited by Soid
Posted (edited)
On 11/12/2026 at 8:00 AM, Todd Miller said:

What does this message refer to then?  Just the motherboard or TrueNAS, not HexOS?

From recent release notes:

https://docs.hexos.com/release-notes/command-deck/2026-11-10

Fan curves for your drives

  • Cool your drives, not just your processor. Motherboard fan settings usually only watch the processor, so drive bays can run hot during long copies or pool checks while the processor stays cool. On supported motherboards, open the Processor card on the dashboard and click Fan curves. Your fans can follow drive temperature or processor temperature.
  • Choose Quiet, Balanced or Cooling, or build your own curve.
  • Built-in safety. Fans never drop below 20%. If a temperature sensor stops reporting, fans run at full speed. If HexOS stops, your motherboard takes back control of the fans within seconds.

 

Some information about what a motherboard needs to be supported would be nice, if they're able to document it. 

 

Edited by Soid
  • Like 1

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...