FangerZero Posted Tuesday at 05:41 PM Posted Tuesday at 05:41 PM (edited) I don't know if any of this helps but I was trying to do the TrueNas Update through HexOS Dashboard and it keeps failing Here's an image of what is on the server screen. Edited Tuesday at 05:43 PM by FangerZero
0 mill3000 Posted Wednesday at 03:02 AM Posted Wednesday at 03:02 AM Thanks for the photo, it helped a lot. Your server is back on 25.10.7 and running fine. The update itself isn't the problem. TrueNAS starts from a small drive (an old 500 GB Toshiba laptop disk), and TrueNAS has found damaged data on it. When the new version was written to that drive, part of it came out damaged, so 25.10.8 can't start. Your storage pool and your files are on other drives and aren't affected. One thing to fix right away: TrueNAS is still set to start 25.10.8 next time. If the server restarts or loses power, you'll see that same error screen. These steps set it back to 25.10.7 and clean up the drive. They don't touch your pool or your files. 1. On a computer on your home network, open http://192.168.50.168 and sign in to TrueNAS. 2. Click System, then Boot. 3. Find 25.10.7 in the list. Click the three dots at the end of its row, then click Activate and confirm. 4. Find 25.10.8 and 25.10.8-1. For each one, click the three dots, then Delete, and confirm. 5. Click System, then Shell. Paste this and press Enter: sudo zpool clear boot-pool If it asks for a password, type your TrueNAS password (nothing shows while you type) and press Enter. 6. Go back to System, then Boot. Click Scrub Boot Pool and wait for it to finish. It can take 15 to 30 minutes. 7. Back in the Shell, paste this and press Enter: sudo zpool status -v boot-pool Copy everything it prints and post it here. Please don't try the update again until we've seen that output. That drive is very old. Even if the check comes back clean, we'd suggest replacing it with a small SSD (120 GB or more is plenty). We can walk you through moving TrueNAS onto the new drive without a reinstall.
0 FangerZero Posted 13 hours ago Author Posted 13 hours ago @mill3000 Sorry it took me a few days, I just got back to this. truenas_admin@Woldra[~]$ sudo zpool status -v boot-pool [sudo] password for truenas_admin: pool: boot-pool state: DEGRADED status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A scan: scrub repaired 0B in 00:17:02 with 2 errors on Thu Nov 19 22:35:36 2026 config: NAME STATE READ WRITE CKSUM boot-pool DEGRADED 0 0 0 sdb3 DEGRADED 114 0 132 too many errors errors: Permanent errors have been detected in the following files: boot-pool/ROOT/25.10.7/var@pristine:/cache/man/cs/CACHEDIR.TAG boot-pool/ROOT/25.10.7/var/lib@pristine:/dpkg/info/initramfs-tools-core.md5sums truenas_admin@Woldra[~]$
0 mill3000 Posted 4 minutes ago Posted 4 minutes ago Thanks for posting that. Steps 1 to 6 worked. Your server is set to start 25.10.7 again and the 25.10.8 copies are gone, so a restart is safe now. The check also showed the real problem: the boot drive is failing. It had 114 read errors in that one check. The two damaged files it lists are spare copies TrueNAS keeps, not your files. Your storage pool is on the other drives and is fine. But a drive with this many errors will get worse, so please replace it before you try the update again. What to buy: a SATA SSD of 500 GB or more since that is what you have now and it's less steps. It must be at least as big as the old drive, or TrueNAS will refuse it (a 480 GB one is too small). Just so you know 256gb is all you really needed originally. When you have it: 1. In TrueNAS, click System, then General Settings. Click Manage Configuration, then Download File. Keep that file somewhere safe. It's a backup of your settings in case anything goes wrong. 2. Shut the server down. Connect the new SSD to a free SATA port and power, then start the server again. 3. Click System, then Boot, then Boot Pool Status. 4. Click the three dots next to sdb3, then Replace. Pick the new SSD and confirm. 5. Wait for it to finish. TrueNAS copies everything to the new SSD. It can take 30 minutes or more. Then post here and we'll check it from our side. After that we'll walk you through removing the old drive and updating to 25.10.8.
Question
FangerZero
I don't know if any of this helps but I was trying to do the TrueNas Update through HexOS Dashboard and it keeps failing Here's an image of what is on the server screen.
Edited by FangerZero3 answers to this question
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now