Jump to content
  • 0

Updates failing? (25.10.7 → 25.10.8)


Question

Posted (edited)

I don't know if any of this helps but I was trying to do the TrueNas Update through HexOS Dashboard and it keeps failing Here's an image of what is on the server screen. 

image.thumb.png.cd172a2156e3f75d6530c24794bb8dbf.png

Edited by FangerZero

1 answer to this question

Recommended Posts

  • 0
Posted

Thanks for the photo, it helped a lot. 

Your server is back on 25.10.7 and running fine. The update itself isn't the problem. TrueNAS starts from a small drive (an old 500 GB Toshiba laptop disk), and TrueNAS has found damaged data on it. When the new version was written to that drive, part of it came out damaged, so 25.10.8 can't start. Your storage pool and your files are on other drives and aren't affected.

One thing to fix right away: TrueNAS is still set to start 25.10.8 next time. If the server restarts or loses power, you'll see that same error screen. These steps set it back to 25.10.7 and clean up the drive. They don't touch your pool or your files.

1. On a computer on your home network, open http://192.168.50.168 and sign in to TrueNAS.

2. Click System, then Boot.

3. Find 25.10.7 in the list. Click the three dots at the end of its row, then click Activate and confirm.

4. Find 25.10.8 and 25.10.8-1. For each one, click the three dots, then Delete, and confirm.

5. Click System, then Shell. Paste this and press Enter:

sudo zpool clear boot-pool

If it asks for a password, type your TrueNAS password (nothing shows while you type) and press Enter.

6. Go back to System, then Boot. Click Scrub Boot Pool and wait for it to finish. It can take 15 to 30 minutes.

7. Back in the Shell, paste this and press Enter:

sudo zpool status -v boot-pool

Copy everything it prints and post it here.

Please don't try the update again until we've seen that output. That drive is very old. Even if the check comes back clean, we'd suggest replacing it with a small SSD (120 GB or more is plenty). We can walk you through moving TrueNAS onto the new drive without a reinstall.

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...