Intel i226-v pcie card

[Christoffer Raabye]

Does anyone know if this NIC will work with HexOS?

I find it incredibly difficult to find any sort of documentation on what NIC's are supported.

[mill3000]

Intel cards are well-supported by TrueNAS Scale. With that said I can't guarantee it but it should. Once you install it you'll have to update a few things if this isn't going to be a new install. On the server once fully booted you'll have to go through options 1 and 2 to make sure it knows to use the new network card. Once that is set you can log into the new ip address for the TrueNAS UI. Once in there you'll want to update the network settings to make sure the settings are correct for the new network card. Last step is edit the HexOS app in the app section of TrueNAS. You need to update the ip of what your TrueNAS was with the old network card to the ip of the new network card (Ip with TrueNAS WebUi). Just go down till you see a setting with the old ip and update to the new then scroll to the bottom to save it. 

Hope this helps. Thanks for supporting HexOS.

[Todd Miller]

I am using a card very close to that one to try to solve the 100 GB/s transfer limit issue and while it works as a card it does not fix the issue.  Now, I didn't do any of the stuff listed here so you may have better luck..  I believe my card has the same chip.  

[Todd Miller]

5 hours ago, mill3000 said:

Intel cards are well-supported by TrueNAS Scale. With that said I can't guarantee it but it should. Once you install it you'll have to update a few things if this isn't going to be a new install. On the server once fully booted you'll have to go through options 1 and 2 to make sure it knows to use the new network card. Once that is set you can log into the new ip address for the TrueNAS UI. Once in there you'll want to update the network settings to make sure the settings are correct for the new network card. Last step is edit the HexOS app in the app section of TrueNAS. You need to update the ip of what your TrueNAS was with the old network card to the ip of the new network card (Ip with TrueNAS WebUi). Just go down till you see a setting with the old ip and update to the new then scroll to the bottom to save it. 

Hope this helps. Thanks for supporting HexOS.

Is this documented anywhere with pictures?  I wonder if this may help solve my issue.  Or at least prevent me from having other issues because I have two ethernet ports.