All Activity

Just did a rollback and everything is back to normal. Not sure what the issue was.

Crap. I let Plex update and now nothing but the webui can access my content. One step forward, two steps back.

I have used gear builds posted like this

There will be a PoE version in the future (according to the FAQ on Kickstarter)

I just got confirmation from the JetKVM support, that USB-C PD is indeed unsupported by the black splitter.

You can also change the password from the NAS itsself . You will need to plug in a keyboard and monitor and go threw the options to reset password for GUI login

For file sync have you guys considered Seafile instead?

hi brain trust; i already went through a lot of the forum but can't seem to find an answer.. hope for some good recommendations; I currently run a Synology DS3615XS with 1 expansion bay, 2X 12 disks in RAID 6, so 2 different arrays, around 200 TB in total. i need to move away from the Synology and with all the consumer unfriendly stuff that has been going on, i want to move to a different system. I have already invested into hexos and bought a perpetual license. while it would be nice to have the NAS run additional software in the future, for now being a SMB is enough for me. I run all my dockers on a different MS-01 from Minisforum that has all the processing power i need. so, what am i looking for? i am looking for a storage server. ideally rack mountable with half-depth, quiet and simple. if possible 24 disks so i can expand.. i would need at least 200tb as a starting storage pool and be able to expand later on. I was hoping ubiqity would release an enterprise version of their NAS since it does everything I need, is cheap and super simple but alas.. while i can figure out most of it, it's the chassis that has me scratching my head.. does anyone have any recommendations?

syncthing, webdav. Would be cool if immich, syncthing and webdav can share files so i can use joplin too!

Support will likely come no earlier than q3. Here is a link to the most up to date roadmap https://hexos.com/blog/hexos-q1-status-update Theoretically you MIGHT be able to migrate to hexos using work arounds but i can't guarantee it'll work. Personally i would still recommend waiting unless there is a reason you need to stop using unraid sooner.

They went into folder which only syncthing app can use. I was confused too, but i think no other apps can use that folder that syncthing uses...

Hi @Mobius and all. Are there any news? Is this something that can be expected already during beta or more likely during or after release 1.0? :)

You are right, in Truenas

The updates are performed within the TrueNAS app and not HexOS right? Or at least that is where I see them.

With those 2 options plus replacing all fans with Noctua, the HD chatter (the clicking from HD usage) is louder than the fans in my Dell server

IPMI commands... Executed from Command Prompt= ✅ Enable Manual Fan Control= ipmitool -I lanplus -H ipaddress -U username -P password raw 0x30 0x30 0x01 0x00 ✅ Disable Manual Fan Control= ipmitool ... raw 0x30 0x30 0x01 0x01 ✅ 3rd Party PCIe Response State (Fast fan speed when no therm sensors on PCIe card)= ipmitool ... raw 0x30 0xce 0x01 0x16 0x05 0x00 0x00 0x00 Result1= ... 00 00 00 (Enabled) Result2= ... 01 00 00 (Disabled) ✅ Enable 3rd Party PCIe Response= ipmitool ... raw 0x30 0xce 0x00 0x16 0x05 0x00 0x00 0x00 0x05 0x00 0x00 0x00 0x00 ✅ Disable 3rd Party PCIe Response= ipmitool ... raw 0x30 0xce 0x00 0x16 0x05 0x00 0x00 0x00 0x05 0x00 0x01 0x00 0x00 ✅ Set All Fans (0xff) to % (??) Speed (in Hexadecimal)= ipmitool ... raw 0x30 0x30 0x02 0xff 0x?? ✅ Set All Fans (0xff) to 50% (0x32)= ipmitool ... raw 0x30 0x30 0x02 0xff 0x32 🚩System fan #'s vary per chassis. Fan1 starts on the left side behind the Dell logo and can go up to 7 fans to the right side behind the Intel badge. The IPMI fan numbers are NOT the same as the Fan# labels on the chassis. Fan1=0x00, Fan2=0x01, Fan3=0x02, Fan4=0x03, Fan5=0x04, ect.🚩 ✅ Set Fan1 (0x00) to 30% (0x1E)= ipmitool ... raw 0x30 0x30 0x02 0x00 0x1E ✅ Set Fan2 (0x01) to 30% (0x1E)= ipmitool ... raw 0x30 0x30 0x02 0x01 0x1E ✅ Set Fan3 (0x02) to 30% (0x1E) ipmitool ... raw 0x30 0x30 0x02 0x02 0x1E ✅ Percentages to Hexadecimal & Fan Speed (R720 example) 10% = 0xA 11% = 0xB 12% = 0xC 13% = 0xD 14% = 0xE 15% = 0xF 16% = 0x10 (~3,300 RPM) 17% = 0x11 18% = 0x12 19% = 0x13 20% = 0x14 21% = 0x15 (~4,000 RPM) 22% = 0x16 23% = 0x17 24% = 0x18 25% = 0x19 26% = 0x1A 27% = 0x1B 28% = 0x1C (~5,000 RPM) 29% = 0x1D 30% = 0x1E 31% = 0x1F 32% = 0x20 33% = 0x21 34% = 0x22 35% = 0x23 (~6,000 RPM) 36% = 0x24 37% = 0x25 38% = 0x26 39% = 0x27 (~6,500 RPM) 40% = 0x28 41% = 0x29 42% = 0x2A 43% = 0x2B 44% = 0x2C 45% = 0x2D (~7,300 RPM) 46% = 0x2E 47% = 0x2F 48% = 0x30 49% = 0x31 50% = 0x32 (~8,000 RPM) 51% = 0x33 52% = 0x34 53% = 0x35 54% = 0x36 55% = 0x37 56% = 0x38 57% = 0x39 58% = 0x3A 59% = 0x3B 60% = 0x3C (~9,400 RPM) 61% = 0x3D 62% = 0x3E 63% = 0x3F 64% = 0x40 65% = 0x41 66% = 0x42 67% = 0x43 68% = 0x44 69% = 0x45 70% = 0x46 (~10,800 RPM) 71% = 0x47 72% = 0x48 73% = 0x49 74% = 0x4A 75% = 0x4B 76% = 0x4C 77% = 0x4D 78% = 0x4E 79% = 0x4F 80% = 0x50 (~12,100 RPM) 81% = 0x51 82% = 0x52 83% = 0x53 84% = 0x54 85% = 0x55 86% = 0x56 87% = 0x57 88% = 0x58 89% = 0x59 90% = 0x5A (~13,300 RPM) 91% = 0x5B 92% = 0x5C 93% = 0x5D 94% = 0x5E 95% = 0x5F 96% = 0x60 97% = 0x61 98% = 0x62 99% = 0x63 100% = 0x64 (15,000 RPM) ✅ Report Temperatures ipmitool ... sdr type temperature ✅ Report Only Temp, Volt & Fan Sensors= ipmitool ... sdr elist full ✅ Report Power Supply Output ipmitool ... sdr type ‘Power Supply’ ✅ Displays Energy Consumption ipmitool ... delloem powermonitor Example: ipmitool -I lanplus -H 192.168.0.1 -U root -P password raw 0x30 0x30 0x02 0xff 0x14

2 options Im using on my Dell T430 currently... 1. IPMI Tools 2. Noctua NA-FC1, 4-Pin PWM Fan Controller (https://www.amazon.com/dp/B072M2HKSN?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1)

@mill3000 can you take a look into this

Add another to the pile. I have not had to log into the deck for quite a while, but found it unable to connect today. Shares, Plex, and TrueNAS ui are working fine, TrueNAS is version 24.10.0.

As an FYI, if you update via the TrueNAS UI, please stick to the 24.10.x track at this time. We are not ready for 25.04 yet, although I would imagine for most everything would work just fine.

Yes. It's a Q3 roadmap item for us.

Is the new template being worked on for software developers to use to create easier installs for their software of for us to use to build our own installs?

app updates are fine however os updates will be done via hexos itself

There is no HexOs update available yet. There was only an update of deck.hexos.com. I think the Plex update won’t hurt, but don’t install the TrueNas update. It’s not recommended and it will break HexOs.

As above , been away and just fired up the NAS ( HexOS ) have just glanced over but i can't seem to see any updates !! ( surely their be at least one it's been months ) booted in turenas scale and seen and updated for Plex which i did without thinking ( i have an other serve running TNscale and without thinking i do any updates ) so did the same on here .... So what i have mist ?