UGREEN NASync with 10G SFP?

[iruixos]

Hi all, sorry if this has been asked already.

I'm wondering if it's possible to use a Cat7 cable connected from the 10G port on a UGREEN NASync device to a 10G SFP interface using one of these:

10Gtek SFP+ to RJ45 Copper Module - 10GBase-T Transceiver for Cisco SFP-10G-T-S, Ubiquiti unifi UF-RJ45-10G, Netgear, D-Link, Mikrotik, Meraki, Linksys and More, up to 30m
 

 

10Gtek 1.25/2.5/5/10G-T SFP+ to RJ45 Copper Module - 10GBase-T Transceiver for Cisco SFP-10G-T-S Ubiquiti unifi UF-RJ45-10G D-Link Supermicro Broadcom Linksys up to 30m Pack of 2 : Amazon.ca: Electronics

Thanks for the help.

[PsychoWards]

Hey,

Yes this should work fine. Just the obligatory warning that those SFP+ Modules with RJ45 are running hot and require a lot more energy compared to fibre optics. So make sure you have airflow/cooling on your switch.

[Sonic]

@iruixos, is the device with the 10G SFP+ interface active cooled?

[iruixos]

@PsychoWards didn't know that, thanks for the heads up!

@Sonic I believe my USW-24 is passively cooled, but it's hooked up to a UDM Pro SE which should have a CPU fan and a chassis fan, and the room has both air conditioning and a Vornado air circulator. I think it should be fine.

thanks for the responses 🙂