My 265k build

[Mobius]

I'm glad i didn't end up painting the case. That would have taken a while and no time. The case came in Thursday night and i worked on it for hours since i got it. 

I still don't even have the motherboard installed 😅

I've also spent a lot of time doing cable management and it still looks like a rat's nest 😅😅

My original plan to drill in mounting holes for the phanteks drive caddies is a bust too but my new plan is less elegant and more expensive 😅😅😅

I realized i had more free sata power and data slots so i bought more drives 😅😅😅😅

Hopefully by Monday or Tuesday i make a new update saying I'm 95% done. This iteration of my server is not going to complete until i can get a part 3d printed and 3d printing services are expensive. I'm reaching out to some friends to see if they have a 3d printer but I'm not hopeful. 😅😅😅😅😅

[Mobius]

Building this server is finally done (after some amazon delays)

i just started the transfer from my only server to the new one and uhm it might take weeks if not months just to transfer 50tb of data from one to the other.
i gotta say it was rough.

ill go into more detail later but new final plan changed to this

Pool 1 (misc storage)

• 3 x 16 tb Seagate skyhawk ai hdd

Pool 2 (main storage)

• 7 x 14 tb Seagate exos hdd
• 5 x 14tb Western Digital ultra star hdd
• metadata vdev
  • 3x 870 evo 500gb

pool 3 (apps pool)

• 2 x Intel Pro 5400s 240 GB 

pool 4 (iscusi pool)

• 3 x 2 tb Samsung 980 pro ssd (found another one in my ps5)

 

im dead tired after software troubleshooting so more info to come after a nap

[PsychoWards]

That's impressive, glad that it's working as you expected it =D

Is your pool 2 now RaidZ2? 🙂 

How do you intend to copy the files over?

If the old server is Hexos/Truenas I would recommend replication task via network or just chuck the old drives in the new server and do a replication tasks from one pool to the other.

If it's none Hexos/Truenas then good luck 😁 nah just kidding rsync is also awesome and if you leave it running you should be done in a week 🙂

 

Do you have an UPS for your setup? 

[Mobius]

1 hour ago, PsychoWards said:

Is your pool 2 now RaidZ2? 🙂 

Yup. It's 2 x 6 wide z2 vdevs or rather it will be once my transfer is complete and i can move over my drives for now is just 1 6 wide z2 vdev

1 hour ago, PsychoWards said:

How do you intend to copy the files over?

I'm using rsyncui, a rsync gui for Mac

My old server is barely a server. It's a Macbook connected to das. I had it run a samba server and my old jellyfin server. It's also WiFi connected so that limits my speeds

1 hour ago, PsychoWards said:

Do you have an UPS for your setup? 

Not yet, i put it off since i haven't had a power outage once since i moved here 3 years ago. But i definitely need one sooner than later. 

Part of the reason i kept putting it off was that the nut compatibility list always seems so daunting

 

[Mobius]

the jonsbo n5 is quite the chonker of a case.
Despite the large size it is incredibly pingy almost like a giant tuning fork.

I ended up using 1 sheet of leftover sound deadening mat i had from working on my car years ago.
i could easily have added even more but i was feeling lazy and the one sheet made a world of difference.
I used Noico Black 80 mil because my custom car audio system wasn't expensive enough for me to purchase anything higher quality.
If i were to buy sound deadening material today it would likely be resonix.
I didn't have a system in the case prior to adding the sound deadening but knocking on the individual pieces it was super apparent that the pinging was gone after.

Quote

I also replaced the screws holding in the backplane with screws with rubber vibration dampeners.
the screws that came with the product were too big and i just replaced them with similar looking screws that came with the jonsbo case
I honestly have no idea if this made any difference at all.
some others on reddit commented that when they added vibration dampeners they were unable to seat their hdds all the way or close the magnetic front cover.
Due to that i went and bought what i thought looked the thinnest in hopes i could avoid the issues they had.
I can happily confirm i am both able to fully seat my drives and close the magnetic front cover

Quote

I added 3 extra hdds to my case.
i had inserted the drives into my phanteks drive caddies that i had from a previous case. If i didn't already have these i would be curious about trying this
the original plan was to drill out some mounting holes for the drive caddies but between my drillbit being too dull to drill through the case and realizing the mounting mechanism is more than just 2 hooks on each side
i decided against doing that. 
A giant unfiltered hole like that would be just begging for bugs to enter.
I also considered double sided vhb tape however the drive caddies would be stuck in a location where it would be impossible to remove the drives from if i did that.
I didn't even consider screwing down the caddies into the case for the same reason.

Originally i was hoping to add the 3 extra hdds to the upper level of the case on the bottom right corner of the case (assume that the mobo io shield is on top left)
Theoretically there was enough room there for the drives and the caddies however it blocked access to a few of my mobo sata ports so i had to give up on that plan.
i think if you avoid mobos with right angle connectors along its right edge it should be fine and more ideal than my solution. (assuming mobo is matx or smaller)

I stuck my drives on the bottom level right under the mobo and next to the psu.
it was a stupid tight fit or the cables.
Also far from ideal when it comes to airflow.
it is sitting directly between the lower level fan and the backplane+main hdd area

I was going to just use velcro but as luck would have it i ran out of velcro.
Instead i consulted chatgpt to see if there were any alternatives that had less micro wobble and still removable.

i was given 2 options velcro alfa lok or 3m dual lock
they both are similar but i picked the outdoor rated alfa lock instead because it had faster shipping.
my feelings on the product is that it is barely removable.
Outside the case i spent a good amount of time and force pre-connecting the  both sides of the alfa lok
i dont have faith i can get a proper connection between both sides if i had to connect them again while in the case

Quote

Next part when im less sleepy 😅