All Activity

I am running a handful of Apps/VMs on my system that I want to easily share with my family and allow some modifications, like starting their VM. In its simplest terms, this could be a portal with all the available apps shown and redirect to their respective port instead of having to manage URLs with different ports currently. The current dashboard would likely be good enough if additional local users could have a login. The next obvious can of worms would be user management, one login for all "supported" apps and SMB? Disallow destructive tasks?

I had the password issue back in the day when I uninstalled and reinstalled immich. At that time, my solution was to uninstall, remove the folders created for it, and then reinstall. That way it started with a clean slate and was able to set the password for itself. Given that installations, or at least updates, are a bit broken in general at the moment, now might not be the best time to sink a lot of effort into this. But the errors listed in this thread so far do not seem related to those issues, so I guess there might be hope.

Sure Here are also screenshots from TrueNas to show that it knows on the backend that there are 2 drives, because the RAID is done in the trueNAS and not in proxmox All are "2 wide"

also having this same issue microservices worker error: PostgresError: password authentication failed for user "immich", stack: PostgresError: password authentication failed for user "immich" 2025-06-06 05:30:31.753551+00:00at ErrorResponse (/usr/src/app/node_modules/postgres/cjs/src/connection.js:790:26)

Can the Eshtek team confirm that we can just update from in truenas?

I am doing my first install of hexos and ran into this as well. couldnt get Plex to install. After seeing your post i decided to yeet the TrueNAS update onto it. (I had nothing to lose so why not). After the reboot Plex installed no problem. Still doing some testing but so far so good.a

Amazing! Thank you for this, you saved me such a headache.

So, the Windows PC I built in 2016 is on the mend, in that it had to get a reinstall from inside Windows itself. A grey screen (of death, they say) meant it wouldn’t start properly. This was such a load on my mind, it had to be done not to block the road for the other small problems. Even if it has nothing to do with HexOS, this PC is not worthy of Windows 11, so Linux would have to come to the rescue in the coming months. Now I only need to find time to work through the rest of my list 😉

Can you make a screenshot of your VM hardware tab?

For completeness, at least in Australia, the remote UI is very slow, which is another reason for this. I understand a remote-hosted server will always be necessary for some of the niceties of "just works" (HTTPS certificates/Servers through firewalls). But it would be good if it could hand off in some cases to a peer connection, like with WebRTC ICE.

In prox if your pool is only showing as 1 drive it will do this, it does not know that the back end is 2 drives becasue it only sees the 1.

Not really. I have HexOs set up as a VM on proxmox where I have this installed on a single drive but other than that all my pools have 2 drives.

The Eshtek team have been made aware, awaiting an answer on resolution.

I wonder if this is what's going on?

Hi, I'm having the problem that I can't install apps because my TrueNAS installation is too old. Updating Hexos is not recommended by the developers, so I won't do that. Can I install my apps using Docker containers, or will that break Hexos? Also, can I use the Plex App installer to install other apps that aren't part of Hexos? Here is the Errormessage im getting; [EFAULT] Catalog app version is not supported due to following missing features: 1) definitions/node_bind_ip For 'Stable' train: Minimum SCALE version: 24.10-ALPHA Maximum SCALE version: Latest available 'Stable' release For 'Nightlies' train: Minimum SCALE version: 24.10-MASTER-somever Maximum SCALE version: Latest available 'Nightlies' release 2) definitions/gpu_configuration 3) definitions/port For 'Stable' train: Minimum SCALE version: 24.10-ALPHA Maximum SCALE version: Latest available 'Stable' release For 'Nightlies' train: Minimum SCALE version: 24.10-MASTER Maximum SCALE version: Latest available 'Nightlies' release 4) normalize/ix_volume For 'Stable' train: Minimum SCALE version: 24.10-ALPHA Maximum SCALE version: Latest available 'Stable' release For 'Nightlies' train: Minimum SCALE version: 24.10-MASTER-somever Maximum SCALE version: Latest available 'Nightlies' release 5) normalize/acl For 'Stable' train: Minimum SCALE version: 24.10-ALPHA Maximum SCALE version: Latest available 'Stable' release For 'Nightlies' train: Minimum SCALE version: 24.10-MASTER-somever Maximum SCALE version: Latest available 'Nightlies' release 6) definitions/timezone For 'Stable' train: Minimum SCALE version: 24.10-ALPHA Maximum SCALE version: Latest available 'Stable' release For 'Nightlies' train: Minimum SCALE version: 24.10-MASTER Maximum SCALE version: Latest available 'Nightlies' release AlsoYour TrueNAS system version (24.10.0) is less than the minimum version (24.10.2.2) required by this application.

can we update to 24.10.2.2 without problems? (i need this otherwise i can not install / update apps anymore... )

Please reach out to us at support@hexos.com and we will directly assist each of you! Thank you!!

I did the update anyway - end result is an inability to boot TrueNas interface, never mind HexOS connectivity (API). I'm running HexOS (TrueNas) as a virtual machine on VMWare Workstation. To fix this, during boot I selected the 24.10.2.2 boot environment and everything came back just fine. Then I went to System-->Boot, made the 24.10.2.2 active and deleted the 25.04.1 environment. Not sure why this isn't possible given the upgrade/update path, but a quick Google search shows many others have issues after upgrading (TrueNas middleware not starting, checksum verification failed, etc.). I wanted to ensure that I did an update because I am NOT doing a full reinstall. It takes over a month for IMMICH to re-index and transcode everything and I'm not savvy enough to figure out how to back up the IMMICH working directory and then restore it later. I only let it access my files elsewhere on the network for the purpose of generating a multimedia gallery. I don't upload to it. Also - I'm not going to reinstall NextCloud: I figured it out once with great pain and much time and endless nights with Chat GPT and don't get me started on the config.php file and "apt-get vim" to be able to do it. If someone wanted to inflict self-harm to themselves, figuring out how to install and work with NextCloud would probably be more soul-sucking than jumping off a bridge.

No, there weren't any errors posted other than the web interface indicating that there was an issue and then being unresponsive. On the monitor everything appeared to be ok outside of some orange text on the reboots that was too fast for me to see. I was able to fix the issue by pulling the OS drive putting in the Thumb drive installer and then rebooting. I then turned off the computer, put the drive back in, and was able to boot from the installer and do a fresh install.

Got a snip of the error or full log of the errors

By pulling out the Drive I was able to do a fresh install of the server. However, Plex still will not install (which is what kicked off this entire ill-conceived project). Will wait for an update but any official fix would be welcome.

Would you happen to be using a 1 drive pool?

I was having issues with Plex not working and after messing with the DNS to try and fix the issue the HexOS command tab would not open but the Truenas web user interface would. Therefore, I plugged my server into my monitor and clicked on 9 (Reset Configuration to Defaults. After completing this the HexOS command center reappeared but nothing would work. It was labeled an unhealthy server and I tried to reset through the HexOS interface and wipe all the data. This has had no effect and the server remains as it was. I have also been unable to boot into the bios to attempt a clean install as it always goes to the HexOS launcher. What do you suggest I do? Reinstall is fine but I would like my system to work again.

Hi, I couldn’t find anything about this on the forum — am I the only one experiencing this issue? When I go into the "Folders" section, it stays in a loading state for a long time. Then the "New Folder" button appears briefly, but after that, it just loops back to loading → new folder → loading again, and so on. Here are some screenshots to show what I mean: Is there a fix for this?