All Activity

i did it with jellyfin, where i had to set it up again (tho content was still there), then i wanted to do it with qBittorrent because its basically default for me, but i cant even update it because it will always throw this error

I'm not sure if this is what you mean, but immich-go can be run by using the shell in truenas. At the risk of outing myself, an LLM of your choosing may or may not be helpful in suggesting some command syntax. (if you do that... please double check that your command makes sense using the immich-go documentation first, and you have an option of running the command in a 'test' mode where nothing is actually done just to verify your settings.) I'd also recommend using tmux to allow the script to run in the background if you have a transfer that is large, and for a very large transfer, I found it necessary to split it up into smaller chunks.

Hi all I've upgraded to HexOS v0.8.251106 and my dashboard shows no installed apps and I can only install the apps from scratch. If I go to the Truenas dashboard [25.10.1 - Goldeye] , all of my currently installed apps [immich, home assistant, audiobookshelf, tailscale, etc] are there, including the data and settings. I can still back up my iPhone images to Immich and Tailscale shows the system as active on the network and I'm able to connect to the Truenas dashboard using the Tailscale assigned UP address, with my RAID array of Samsung 2tb 870 QVO drives. I'm not entirely sure what's going on and I've tried to restart the system 3 times now and I'd like not to lose any data. I can post screenshots if required, just ask, and run any commands if anyone wants me to report back certain information on the system. Specs, if required: AMD 5700G, B550i strix, 32gigs DDR4-3200 CL17 Corsair RAM, RM750i PSU. Thanks in advance

I figured it'd keep the DB etc, but it was like a fresh install unfortunately. I specifically chose Radarr to try it, as I only added a couple of movies and did not set up much. If I had to do the above for Jellyfin and Sonarr it'd be a real hassle. Though I should note that I did not make a backup from Radarr beforehand (via GUI) so I didn't try the restore after - if you did that you probably could restore the library at least after you restored the mounts.

After the Goldeye update I seem unable to get my RTX 5060 Ti 16GB to show up in app settings for acceleration as I was hoping this update would enable. In the previous version a quick lspci | grep -i NVIDIA command would show it as installed and that remains unchanged, what has changed is it now shows as something in the list of GPUs that can be isolated and in apps => configuration => settings I can now enable Install NVidia Drivers but it doesn't show up in the container settings and using midclt call app.gpu_choices | jq only shows the iGPU. Seeking advice or support.

Oh wow! I could understand the mounts (if different than the default locations). The rest like API keys are a bit confusing unless you weren't able to reconnect to your previous database. It would be nice if the interface perhaps showed a comparison between what the existing configuration is and what the updated one looks like so that changes could be minimised before updating. That way, if I have to move a mount manually before the upgrade I would do that so that once the update is done everything works exactly as before I switch to the curated version.

Tdarr & Tdarr node - the setup on youtube in truenas scale looks scary

If it’s currently working on the latest build we don’t need to do anything right ?

I did this as a test with Radarr and it completely reset everything. Had to redo mounts, set the new API Key everywhere etc. Bit annoying and unfortunate, won't be doing it with Sonarr etc as I did a ton of stuff in there unless it's absolutely necessary. The UI wants me to update the configs for Sonarr, Jellyfin, Radarr (done this one as it's the least used of my curated apps) and Prowlarr.

Hi all I installed the new update for HexOS and truenas (Goldeye) yesterday. I could not reconnect to the server trough HexOS after the update. The server is still accesseble trough Truenas login. I did unclaim the server to reclaim it agian. Now it doenst show up at all. Does someone has the same issue or has a fix for it. Thanks in advance. Marc

So my update to 25.10.1 - Goldeye was uneventful with no errors reported and all apps and VMs seeming to function perfectly. Great job guys! Now in the interface I see this alert for a few apps: If I click the update now button I then have this warning: I was wondering if this was the way to migrate from TrueNAS installed apps to curated ones? Is the process safe?

after installing the update my 2 of 2 HDDs are both saying they've failed. Previously worked with 0 issue before the update, even yesterday they were working fine with new files uploaded.

245tb ssd, would be amazing. I'll take 2? I have a kidney....

Super excited for this. I'm done with Apple iCloud, and remote storage out of my control so I'm looking forward to making my own server, however. Does HexOS have a way to communicate with a UPC? For example. Say I lost power and HexOS communicates with the ups and the ups says "hey! We lost power, you got 20 minutes before your dead!" So the server shuts down after it finished whatever it's finished. But they starts back up when power returns it boots back up? Or is this. BIOS setting? (I don't think it's a bios setting) -- Orion

Woh who! Emby!

Thanks very much this comment just helped me fix immich after my update saved me a lot of poking around.

Awesome! I have a Intel iGPU with Jellyfin. How do I know if transcoding is taking advantage of my iGPU now?

Nevermind, It started working again. I'm not what specific thing I did resolve it or if it resolved on it own. I've rebooted it several times through the UI. I've turned off all running apps.

Hello, I recently upgraded to 25.10.1 through the HexOS Ui but something has gone wrong and I can't access it any more through the commanded deck. It currently list's the server as offline but I can still connect to the TrueNAS local network UI without issue. I'm not sure fix this with out a OS reinstall. I've checked DNS settings, and the TrueNAS can ping google from its command line. I've made no changes to my home network and the NAS was access before the update. I'm not sure where to look for HexOS Errors in TrueNAS. Any help would be greatly appropriated.

Hi, very nice update, here are some points of feedback: On the Immich app, it showed the button "An updated configuration is available for this app", which I clicked. Afterwards, my Immich instance wouldn't start up again. I looked into it on the truenas interface where the server container wouldn't start but instead display long error messages before crashing. I noticed that the data storage path was moved from "Host Path" to ixVolume. After I changed it back to the original path, everything worked again. If the switch to an ixVolume is intended, I'd like to have the option (in HexOS) to choose a host path instead, as I want to be able to access my photos via the smb share from another pc. I guess, my trouble with the immich app could have been avoided, if the update notification in the HexOS interface showed the changes clearly, instead of the generic "This will reset every change you made in TrueNAS" message that pops up right now. Also, I installed Nextcloud before it was curated on HexOS, so now I would be interested in migrating my installation to the curated version (without uninstalling and re-installing the app). I tried using the configuration update button, which (expectedly) did not do anything.

sorry for the name change. Made new account because i forgot the password to this one. but found it. The drives are WD10spcx-24hwst0 - https://www.amazon.com/gp/product/B00DCM91WQ?smid=A2LNMCKTCZIL8P&psc=1 I got the system on ebay and it had little info about just a link to this page - https://www.delltechnologies.com/asset/en-us/products/servers/technical-support/poweredge-r760-spec-sheet.pdf

Oh nice thanks, yes that works.

at the top of the hub, you can select the store tab and then orders or manage purchases. both should show you how many licenses you have

Can you please also post more details on your HDDs? Those might be SMR drives which will likely cause a lot of (performance) issues in the future.

What HBA / Raid / Perc card 8s in the server