Can this work with a QNAP NAS?

[echerish]

I have a TS-x31K 4-bay nas. It's a small quad-core 1.7GHz CPU and 1GB RAM. 

Is there any way you could flash this on the box?

[Almeda]

No, it requires minimum 8GB RAM and x86 CPU, your NAS only has 1GB of RAM and uses a ARMv7 CPU.

Quote

 

HexOS is designed to support a wide variety of x86 hardware (Intel or AMD).  The minimum requirements are a 2-core 64-bit CPU, 8GB of memory, and a 16GB or larger SSD boot device.  However, depending on your needs for performance and applications, more resources may be required.

Storage pools are made up of devices based on size and type (HDDs vs. SSDs).

Storage devices in each pool need to be roughly the same size*.

The OS boot device cannot be a part of a pool.

Expandable pools require a minimum of 3 devices and can be grown one device at a time.

Non-expandable pools can be created with 2 devices.

Initial pool width should not exceed 8 devices.

Maximum expanded pool width should not exceed 12 devices.

At least one storage pool must be created to use HexOS.