TwoStroke

I should probably have thought of a grinder, but my rack is underneath an IKEA butchers block which is my desk, so I didn't want to set that on fire. Or the carpeted floor in my office....

Oooh this is a *very* good idea. I will get onto this right away. Do you have any recommended tutorials on automating this backup to OneDrive / Google Drive? I am under the assumption that as of right this moment, if it dies and I restore my TrueNAS I can't bring it back into Hex, but this will be something that will be possible in the future.

Next item for me on the list is probably looking at a 10Gbps NIC, but at the moment 2 x 2.5Gbps on the motherboard has been plenty in a bond.

I had to open my NAS up to put some new 2.5" SSDs in it for my LANCache to run on as it had just been running on my HDDs as a test, so I figured what better time than now to take some photos and do a post? Specs: Case - Sliger CX3702 Motherboard - Asus Pro W680M-ACE SE CPU - Intel 14600k Cooler - Noctua NH-D9L RAM - 2x Kingston 32gb ECC DDR5 HBA - LSI 9400-16i Power Supply - Corsair 850W SF850L HDDs - 2x 4tb Ironwolf Pro, 2x 16tb Ironwolf Pro, 2x 18tb Ironwolf Pro SSDs - 1x 128gb 2.5" Samsung Boot Drive (This is an old SSD that I used to have in a PC?) - 2x 2tb NVME Drives - 2x 2tb 2.5" SSDs Notes for people in future - If your rack is 18" deep and the server is 17.72", you won't have room for cables, so I needed to get some tin snips and cut a hole in the back of my rack so that ethernet and power would fit.. But then I used tape so it wasn't sharp on the cables! (Also, I promise I vacuumed those spider webs...) Looks just like a bought one! Here's a photo before I tidied my rack, still has the old Synology on top of the new NAS before I transferred all my data. I'll add another photo after I get everything back in the rack, I have tidied things up a lot since then Other items in the rack: Synology DS916+ (Replaced with this new NAS) Intel NUC (Runs my Plex server until HexOS supports intel GPU passthrough) Eufy Homebase (For my doorbell) Raspberry Pi 4 running HomeAssistant (Only until HexOS official VM support comes!) Unifi UDM-SE Unifi 24Port Pro switch

In this section, below Featured Posts, this is spelled 'Annoncements'. Not a big issue, but hopefully quick to fix!

I don't know if they can commit to when, but I know that @jonp said here that it is on their list! Hopefully they find all the troubleshooting done by @Tamaluko and the others in this thread helpful to their investigations, and can get this to work with the way that they implement the Plex app, but I have a feeling that having it work in the same way that they want all their apps to work with permissions and folders, and resolving the transcode issue, may be a little tricky.

I am mildly concerned they are losing out on their best window to have beta testers by not keeping people more involved. When I first installed HexOS I was checking the forums every single day, waiting to see what's next and what I could test next. I decided to go 'All-In' because I wanted to properly beta test this product and I run HexOS as my primary NAS now, but it's gotten to the point where I never even go to the HexOS Dashboard anymore, everything is done through the TrueNAS UI. If I disconnected it from the Deck, I would not notice a difference in my experience. Without engagement from the team (I understand they are very busy, and they launched at the worst time you could possibly launch a product, leading into the holiday period where most places shutdown for a while, hiring freezes, etc), I am losing my motivation to "care" at the moment, which is sad. However, I could definitely see a new road map announcement making me excited again! It's just hard to see at the moment. I have been holding off migrating my Home Assistant to a VM until they release their VM manager, and I am holding off migrating Plex to HexOS until they "officially" support hardware transcoding, so when some of these things happens I will get excited again, I am sure.

Hey mate, You may be running into the same issue I was having, which occurred after uninstalling and reinstalling Immich. Here is how I resolved it, please give this a try before going through with resetting your server.

DIsregard, I have worked out how to do this in the global network settings! Thanks!

I'd like to see a future feature of creating a bonded interface within the deck, and then if interfaces are in a bond you have the option to hide them from the dash so you just see the bond. I would also like the ability to hide other NICs, too. I have a BMC NIC that is showing up, which really doesn't need to be on my dashboard. Thanks!

I would like to be able to change the name of my server in the HexOS deck. I named mine HexTest for when I was just testing out the OS, but now I have migrated to it and am daily driving it as my primary NAS OS and would love to be able to rename it from HexTest. Thanks!