Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Mobius
    i can ask around but no promises
  3. Paule96
    not really running running, The problem is that I can choose between HBA or Network. What is both quite important for a NAS 😄 But I can not have both. At least not with HexOs. TrueNas alone as mentioned just works fine That why it would be quite interesting to know how to manually start the HexOs processes to give them a second chance to start when I'm ready
  4. Today
  5. Mobius
    im glad you were able to get hexos up and running. yeah it seems like quite an involved process to add drivers. i'll probably hold off on it for now.
  6. Paule96
    Hm you are right. I added a second ethernet card and now the server shows up correctly. So maybe my driver is just loaded to late for hexos. (because in the Deck I only see the ip of the offical supported nic) How I did it was quite a challenge but it is working so far: https://www.codez.one/adding-your-driver-to-truenas/ So I guess it's a timing issue when my driver is load. (I use the preinit scripts that truenas offers to load it)
  7. judo-icy
    judo-icy joined the community
  8. PsychoWards
    In addition to what M said, low idle power draw doesn't necessarily mean, low performance hardware, modern high performance HW also has amazing power savings potential & idle power draw, so you don't need to go low performance, or old HW. Some easy wins are disabling unused HW/parts in the BIOS (Audio, onboard NIC if a dedicated NIC is used, Wifi etc...)
  9. Adorablorp
    Adorablorp changed their profile photo
  10. Adorablorp
    Adorablorp joined the community
  11. PsychoWards
    +1 to get Snapshot, scrubs and data replication control in the deck 🙂
  12. Mobius
    hmm at this time these options can only be done in truenas ui. i would imagine at least some of the options should come into hexos ui but i will check in with the team for you
  13. Todd Miller
    I was watching this video and the speaker talked about ZFS options in TrueNAS. I don't really know enough about this so I will just ask my question this way. Will HexOS have any control over scrubs or snapshots or is this something we will have to go to TrueNAS for?
  14. Mobius
    here are some low power server builds (not necessarily on hexos/truenas) https://docs.google.com/spreadsheets/d/1LHvT2fRp7I6Hf18LcSzsNnjp10VI-odvwZpQZKv_NCI/edit?gid=0#gid=0 These are just some general things to keep in mind you can can expect each hdd and ssd to add 2-7w at idle. not using a discrete gpu will save you 10-20w at idle keeping peripherals unplugged (monitor, keyboard, mouse) help a bit old amd cpus have trouble if c states are enabled. (c states are kinda sorta low power modes) fan power draw ads up skip the rgb
  15. see.dante
    I'm wondering what the recommendations for a low power setup. Since HexOS isn't arm compatible, I'm wondering if there recommendations are. If anyone has success with a low idle setup, would love to know!
  16. gekoboii
    gekoboii joined the community
  17. SnapShot_MasterOfMirrors
    SnapShot_MasterOfMirrors changed their profile photo
  18. Mobius
    i would love to hear about this process. That seems weird. I also have an unsupported nic and on 2nd or third boot i just added a usb nic without issue. That said there might be a couple workarounds that might work for you, if your first boot theory is true. plug in your boot drive to a pc with a supported nic and reinstall once you setup your custom driver you can move the boot drive to your server borrow a usb nic for first boot
  19. vegas79hochiday1
    vegas79hochiday1 joined the community
  20. Buttfroth
    Buttfroth joined the community
  21. Yesterday
  22. Paule96 started following How to run the special HexOs scripts after first boot
  23. Paule96
    I have a quite big question. I try to install HexOs on a PC that has a NIC that is not supported by TrueNas. Thats fine because I can build my own driver and install the driver just after boot. But it seems to be something special hapoens on the first boot of HexOs to enable all the Hex extensions of TrueNas. Does anybody know or wants to share how to run this again if it fails once? I'm currently really at a dead end for hexos what is really sad.
  24. jd45093
    jd45093 joined the community
  25. ExtraPerry
    ExtraPerry joined the community
  26. Dale.file
    Dale.file joined the community
  27. MatthewR2501
    MatthewR2501 joined the community
  28. Notebookpaige
    Notebookpaige joined the community
  29. Last week
  30. vojtasoo
    vojtasoo changed their profile photo
  31. huynh5000
    Recently started subnetting my network, and since subnetting the Deck can no longer find my server. I can ping the server, I can log into TrueNAS with the IP address, and access all my apps on my server. I've reset my network and my server but that didn't seem to fix the issue.
  32. Mobius
    its actually that the app must NOT be in a stopped state. its a silly error but you can resolve it by running the app and then once it is running starting the update
  33. rphljr
    I have the same issue. Is there a setting to change the port?
  34. Technodabbler
    Does it change the name of the server in the deck? I was able to change it locally, but the control deck still displays the old name. Alex
  35. Hq216493

    n8n

    Hq216493 replied to sim's topic in Applications

    100%
  36. Redacted
    Just turned my server on after about 3 months of being offline. Everything upgraded and rebooted just fine except Immich. The error i receive is saying the app needs to be stopped but it is already in a stopped state. HexOS UI has the app permanently in an upgrading state and stuck at 20% Any help would be appreciated
  37. Mobius
    you're welcome. Keep in mind if you setup the newest version of truenas (at this time) you would have to wipe your storage once you install hexos.
  38. Mobius
    its been a while since i created an installer to check whats on it and i can't find mind at this moment but its normal for os installer usbs to have multiple partitions
  39. Koda89
    Mobius started following How to run the special HexOs scripts after first boot , Is this available through HexOS (or another trip into TrueNAS)? and Low power recommendations?
  40. Mpawood
    I agree, i would think an android app would at least be easier to distribute as you could just offer the APK rather than having to go through apple's playstore checks so i'd be surprised if we saw an ios app before we saw an android app
  41. Nai
    This seems like a similar problem to what I saw with Home Assistant: I'm currently between giving up and just going to truenas community vs continuing to troubleshoot.. I might try the fix you did with my issue as well to see if that works.
  42. IvanTheChemist
    Nope, nothing. Well, it seems that the order didn't go through. Might purchase this month if I fail to set up something like TrueNAS🙂 Thanks for your help!
  43. Kolstrike
    Hello All, noob here. I have downloaded the needed file to my PC, used the BalenaEtcher to mount. I am trying to mount the ISO to a flash drive, and it keeps splitting the flash drive into 3 new drives. Perhaps I am just reading the instructions wrong, but I was just wanting to install on the flash drive then boot to the SSD in my server. Advise if I should just mount the ISO to the SSD and then move it to the new PC.
  44. Mobius
    Yup its from the hexos.com domain. Try checking all the email addresses you use. Unless you deleted the email or didn't end up purchasing it you should have something.
  1. Load more activity
×
×
  • Create New...